Pressure filter for hydrostatic systems

For protection of actuators, pumps and motors with Schroeder filter 14-CRZX10.

Contamination during cold start of hydraulic systems

Generally, almost all contamination enters the hydraulic system during cold start. The reason is that the filter by-passes the oil when the pressure becomes too high. This is eliminated by using a pressure filter that can withstand the high pressure = The oil is forced through filtration in all conditions.

Pressure filter for hydrostatic systems

Pressure filter 14-CRZX10 is compact and convenient and can be mounted in a custom-made valve manifold with pressure relief valve, as per the image above. The pressure relief valve leads to the tank or the suction side of the pump.

Electronic pressure sensor for hydraulic filter

Electronic pressure sensor as an option can also be used for monitoring the filter pressure; when a higher pressure is indicated by the sensor, filter replacement is recommended.

If the filter is clogged, pressure to the power steering is not maintained and the machine stops, which forces the user to replace the filter.

Pressure filters for manifold installation are available in two sizes:

14-CRX10 manifold installation 23 lpm
20-CRX10 manifold installation 45 lpm

Feel free to contact us if you want to know more!